Tool required: Phillips screw driver
1. Since The Slider™ is shipped for right hand installation, the slider need to be turned over and the linkage needs to be changed to the other side of the shelf for left side installation. The reverse side of the instruction sheet has an illustration and detailed instructions for this. Use one of the long screws as a punch and the handle of your screwdriver to tap out the pin connecting the linkage to the back of the shelf. Turn the shelf over, reinstall the linkage, and pin as shown in the illustration on the instruction sheet. These instructions are identical but opposite those shown for the right side.
HOME - SIZES & PRICES - INFORMATION - COMPARE - TO PURCHASE